TES-01/EX

The monitoring units are widely applicable and very trustworthy:

  • Specific monitoring systems: detection of resistance or capacity
  • Safe discharging of sparks with high energy level: inside the enclosures of the monitoring unit.
  • Permanent electrostatic monitoring of the object.
  • Intrinsically safe permanent guarding of the earth connection.
  • Red/green signal lamps for local status indication of the earth connection.
  • Volt-free contacts for remote control, for instance for turning on a pump.
TES-01/EX
Show photo

Product specifications

Description Capacitive
Application for trucks
Operation This is a system with capacity recognition and R <20 ohm. First the capacity of the truck is tested. When this is within the prescribed limits, the monitoring unit is activated. Since this system cannot be misled, it offers a high degree of security.
Weight 10 kg
Ex Certificate ITS18ATEX103784

Classification

  • II 2(1) G Ex d [ia Ga] IIC T6 Gb
  • II 2(1) D Ex tb [ia Da] IIIC T85°C Db

Zone

0 1 2
20 21 22

General technical specifications

Housing cast aluminium
Finisching Alodine 1200, colour natural or RAL 7032
Protection IP66
Voltage 230/115VAC ±10% 50/60Hz 0,4W 24VDC ±20% 0,4W
Volt-free contact 1 change over contact, 1A at 250V AC1
Features red lamp = no earthing green lamp = proper earthing
Gland entry 4 x M20 x 1,5
Ambiant temperature -10°C - +40°C
Guideline ATEX
Manufacturer Stuvex
Suited for
Zone 1 Zone 2
Zone 21 Zone 22

Extra

  • Active clamps:
  • For initiating and monitoring earth connections.
  • The two clamp jaws of active clamps are both insulated of each other and of the clamp body. As long as the clamp has not been connected to a conductive body, the circuit between the clamp jaws remains open. Once the clamp is connected, the circuit is closed. This is an active signal to start the monitoring. At the same moment, the clamp jaws connect the object to the earth.

Dimensional sketches